Facebook Twitter Gplus YouTube RSS Email Subscribe
magnify
magnify
Home RC Cars and Trucks TLR 8IGHT-T 4.0 Nitro Truggy
formats

TLR 8IGHT-T 4.0 Nitro Truggy

TLR 8IGHT-T 4.0 Nitro TruggyThree months after its buggy sibling was announced, Team Losi Racing unveils the 8IGHT-T 4.0 Nitro Truggy! The suspension and drivetrain refinements engineered into the 8IGHT-T 4.0 truggy are inspired by a single purpose-giving racers of all experience levels a nitro truggy that is easy to drive fast, whatever the track conditions. Other updates, like the large-footprint engine mount and molded drivetrain boots, improve durability. It all adds up to a faster, tougher truggy that can take on the best the competition has to offer, right out of the box.

Revised Suspension Geometry
New suspension geometry makes it easier for drivers of all experience levels to turn faster lap times with fewer mistakes, particularly during brutal, hour-long mains.

Optimized Drivetrain Layout
The engine has been repositioned to reduce front driveshaft angle so more power makes it to the front wheels

Ball Bearing Throttle and Brake Actuator
This revised actuator makes throttle and brake response feel incredibly smooth and precise. It also features a new brace that prevents flexing during heavy braking.

Large Bearing Spindles and Hubs
Front spindles and rear hubs have been revised to accept a larger 8 x 16 x 5 outer bearing for increased durability.

11mm Narrower Track Width
Shorter suspension arms narrow the track width by 5.5mm on each side. This benefits handling on tight sections of the track by making the vehicle more dynamic and allowing it to transition from one direction to the other more quickly.

Large-Footprint Engine Mount
In addition to its new position, the engine mount has been designed with a larger footprint that substantially reduces chassis flex and fatigue underneath the engine when racing on high-grip tracks.

Adjustable Caster Blocks
The adjustable, 15-degree caster blocks make it possible to tune dog bone plunge by changing the height of the spindle.

New Bleeder Shock Caps and Seals
The new bleeder shock caps and internal seals allow for easier rebuilds while using an emulsion shock setup. New bushings that press into the shock cap further improve durability.

Driveshaft and Dog Bone Boots

Molded rubber boots on the CVAs and center drivetrain dog bones increase U-joint life by holding lubrication in and keeping dirt out.

Redesigned Shock Towers

The machined aluminum shock towers have new camber link and shock location holes that give racers more tuning options for changing track conditions.

Cab-Forward Body
The cab-forward body moves aerodynamic pressure further forward on the car, which improves steering.

Specs

  • Length: 18.75″ (476mm)
  • Width: 15.90″ (405mm)
  • Height: 7.30″ (185.5mm)
  • Wheelbase: 14.93-15.09″ (379-383mm)
  • Part: TLR04005
  • Price: $620 Buy Now!

Pictures

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Leave a Reply

Your email address will not be published. Required fields are marked *


Copyright © 2012-2016 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact