Facebook Twitter Gplus YouTube RSS Email Subscribe
magnify
magnify
Home Offroad RC Tekin Announces Their First Servo Lineup

Tekin Announces Their First Servo Lineup

Tekin T-440 Servo
While we don’t usually post about new servos, when a company like Team Tekin, who has such a long and rich history in the RC hobby announces their first servo lineup we take notice. Yesterday, Tekin unveiled eight new servos including two low profile servos, two standard sized servos, two 1/8 servos and two crawler servos. Each comes equipped with a digital magnetic position encoder in place of the standard potentiometer that most other servos utilize. This gives Tekin’s servos the best accuracy and linearity in the industry. Check out the rest of the details and specs on each of the new Tekin RC servos below.

​Accuracy
Precise linear movement through the entire motion range with less than .2 degrees of deviation from start point to end point make Tekin the superior performance product. This eliminates the problem of a potentiometer, which tend to wander and center poorly. Tekin is built to last at peak performance.

Linearity
Potentiometer servos can be up to seven degrees non-linear from end point to end point position, creating a disconnected feel from your transmitter. Tekin servos eliminate this, giving you a connected linear feel and more precise control over your servo movement and position.

Repeatability
Performance is important but we are all about consistent performance. Potentiometer performance drifts due to many variables; heat, age, quality, etc. Magnetic Encoding is a rock-solid, repeatable and consistent technology bringing an unmatched consistency to Tekin servos. Tired of constantly trimming your servo and having response feel different during times of longer usage?

Efficiency
Accuracy drives efficiency. A servo that has to work less to center or stop without overshooting position is using less energy. This means less heat build up, less component fatigue and longer life.

Element Proof
Dependable, no matter the terrain. Element Proof Tekin products are designed to handle water, mud & snow within reasonable restrictions. While we are not afraid to take on the elements, submerging is not recommended and voids the warranty.

T-120
Speed and accuracy combine making this T-120 Lo-Pro Servo a perfect choice when precision and quick reflexes are at work. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    141 – 128 – 110 oz/in
    10.1 – 9.2 – 7.9 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    256 – 227 – 190 oz/in
    18.5 – 51.8 – 13.7 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.04 – 0.05 – 0.06sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.06in / 40 x 20 x 27mm
  • Mounting Height (Base to Mount Tabs): 0.72in / 18.4mm
  • Weight: 1.92oz / 54.6g
  • Part: TT1500
  • Price: $160

T-180
Big Torque in a small housing, this T-180 Lo-Pro Servo gives you plenty of options on the track. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    212 – 194 – 165 oz/in
    15.3 – 14.0 – 11.9 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    350 – 323 – 280 oz/in
    25.2 – 23.0 – 20.2 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.06 – 0.07 – 0.08sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.06in / 40 x 20 x 27mm
  • Mounting Height (Base to Mount Tabs): 0.72in / 18.4mm
  • Weight: 1.92oz / 54.6g
  • Part: TT1501
  • Price: $160

T-130
Command every turn and pass the competition with confidence using this T-130 Servo. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    148 – 136 – 120 oz/in
    10.7 – 9.8 – 8.7 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    220 – 190 – 160 oz/in
    15.8 – 13.7 – 11.5 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.03 – 0.04 – 0.05sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
  • Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm
  • Weight: 2.53oz / 72g
  • Part: TT1502
  • Price: $170

T-190
Precision and Power in both on and off road, the T-190 commands the track. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    241 – 215 – 180 oz/in
    17.4 – 15.5 – 12.3 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    371 – 348 – 282 oz/in
    26.7 – 25.1 – 20.3 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.05 – 0.06 – 0.07sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
  • Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm
  • Weight: 2.53oz / 72g
  • Part: TT1503
  • Price: $170

T-250
Pick your line and pass the competition with the Tekin T-250 Servo. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    310 – 282 – 245 oz/in
    22.3 – 20.3 – 17.6 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    449 – 415 – 325 oz/in
    32.4 – 29.9 – 23.4 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.07 – 0.08 – 0.09sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
  • Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm
  • Weight: 2.53oz / 72g
  • Part: TT1504
  • Price: $170

T-300
Pick your line and pass the competition with the Tekin T-300 Servo. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    354 – 328 – 284 oz/in
    25.5 – 23.6 – 20.5 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    482 – 450 – 380 oz/in
    34.7 – 32.4 – 27.4 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.08 – 0.10 – 0.11sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
  • Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm
  • Weight: 2.53oz / 72g
  • Part: TT1505
  • Price: $170

T-360
Hit the trails hard with the Tekin T-360 Crawler Servo. Rocks, Mud, Dirt or Snow. The Element Proof Design means you can tackle any terrain. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you out of a bind. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    413 – 382 – 344oz/in
    29.8 – 27.5 – 24.8kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    511 – 480 – 453oz/in
    36.8 – 34.6 – 32.6kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.09 – 0.11 – 0.13sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
  • Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm
  • Weight: 2.57oz / 73g
  • Part: TT1506
  • Price: $170

T-440
Hit the trails hard with the Tekin T-440 Crawler Servo. Rocks, Mud, Dirt or Snow. The Element Proof Design means you can tackle any terrain. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you out of a bind. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.

  • Torque:
    8.4 – 7.4 – 6.0V
    502 – 460 – 421 oz/in
    36.2 – 33.1 – 30.3 kg/cm
  • Dynamic Torque:
    8.4 – 7.4 – 6.0V
    578 – 550 – 499 oz/in
    41.6 – 39.6 – 35.6 kg/cm
  • Speed:
    8.4 – 7.4 – 6.0V
    0.11 – 0.13 – 0.15sec/60°
  • Input Voltage: 4.8V-8.4V
  • Gear Set: Full Metal
  • Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm
  • Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm
  • Weight: 2.57oz / 73g
  • Part: TT1507
  • Price: $170

Pictures

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Leave a Reply

Your email address will not be published. Required fields are marked *


Copyright © 2012-2017 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact