Facebook Twitter Gplus YouTube RSS Email Subscribe
Home Offroad RC Pro-Line Performance HD Transmission

Pro-Line Performance HD Transmission

Pro-Line Performance HD TransmissionPro-Line Racing officially announces the availability of the new HD version of their Performance Transmission. First introduced in the Pro-MT RC monster truck, the Performance HD Transmission is also compatible with the Pro-2 short course truck and buggy, as well as the Traxxas Slash 2wd, Stampede 2wd, Rustler and Bandit. More info and pictures of the Pro-Line Performance HD tranny’s internals after the break.

Pre-Assembled – Install and Go!
Transmissions are complicated and have a lot of moving parts. Pro-Line has done the work for you and pre-assembled the transmission to get you out and bashing faster! All you have to do is install and go! The Sealed, Oil-filled Differential has been pre-filled with 5,000 wt. diff oil and the slipper system has been pre-set for proper performance.

Sealed Oil-Filled Gear Differential
The single biggest feature and upgrade over your stock transmission is Pro-Line’s Performance Differential. The design is based off of 1/8 Buggy style sealed differentials and is completely tunable to your current track conditions by changing the weight of the diff oil. The Differential features super smooth Steel Internal Diff Gears for the ultimate in durability and 4 O-Rings and a Diff Gasket that seals against fluid leakage. You will be amazed at how smooth the Differential is and how much it improves the performance of your vehicle.

Race Inspired Slipper System with Vented Discs
The Performance HD Transmission features a proven, race style Slipper Pad and plate system that is more consistent, lighter and runs truer than the stock slipper design. The Plates are Hard Anodized Aluminum with Vent Holes, which reduces heat and improves slipper consistency. Pro-Line’s 86T Spur Gear is extra wide for durability and is not offset like the stock spur gear. No more wobbly spur gears! The Clear hard plastic Gear Cover has a removable rubber cap for easy access to adjust the tension on the slipper system. Adjustments can be made with the same 7mm tool that you use to remove wheel nuts.

Heavy Duty Steel Gears
Pro-Line’s new Performance Transmission HD has been built to take some serious power with all steel internal gears. This allows for bigger motors, more powerful batteries and loads of wheelie popping fun! The Top Gear, Idler Gear, Bottom Gear and all of the internal Differential Gears are all made from strong Steel.

Aluminum Motor Plate, Full Ball Bearings, & Other Awesome Features
There are so many other awesome features that make Pro-Line’s Performance HD Transmission a must have. The motor mounts to 3mm thick Aluminum Motor Plate with cooling fins and a machined P-L logo, all of which act as a huge heat sink to keep your motor running cool. High quality Ball Bearings are used throughout the Transmission and the Differential spins on huge 10mm x 16mm x 5mm Ball Bearings for incredible load capability. The Toe Block is molded separate from the Transmission Case allowing for quicker and easier access to the Transmission when tuning the Differential Oil. The separate Toe Block also opens up the possibility for different tuning blocks (Toe Angle and Anti-Squat) to be used at some point in the future… The Hardened Steel Outdrive Shafts will accept the stock axles, as well as any aftermarket CVD’s or drive shafts that you might have for your vehicle.


  • Part: 6261-00
  • Price: $115


 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2012-2018 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact