Facebook Twitter Gplus YouTube RSS Email Subscribe
Home Offroad RC HPI Reactor 500 Battery Charger

HPI Reactor 500 Battery Charger

HPI Reactor 500 RC Battery ChargerNew from HPI comes the Reactor 500 RC battery charger! With universal voltage input, total compatibility with all available battery types including Li-Ion, LiPo, LiFE and Pb, fast charging up to 5 amps, discharging, balancing, cycling, multiple profiles and microprocessor control, you won’t have a need for any other charger on your pit table. Check out the full list of features and specs for the HPI Reactor 500 after the break.

Microprocessor Controlled
The optimized microprocessor controller perfectly controls the charging, balancing and discharging, and prevents the overcharging of all types of batteries. The microprocessor disconnects the charge current and sounds and alarm if there is a malfunction.

LiPo & Li-Ion Charger/Balancer
Safe charging of lithium polymer (LiPo) or Lithium-Ion (Li-Ion) batteries from 1S up to 6S. Maximum charge voltage of 4.2V/cell for LiPo, 4.1V/cell for Li-Ion; up to 1C fast charge per cell.

Charge the latest LiFe batteries (up to 6S) with complete confidence. Maximum charge voltage of 3.6V/cell up to 4C fast charge per cell.

NiMH & NiCd Battery Charging
Charge all current NiMH or older NiCd cells at up to 5 amps for safe and fast charging, from 1 to 15 cells.

Pb Battery Charging
Pb (lead-acid) batteries from 2-20V can be easily charged for engine starters, etc.

Discharge cells at a safe rate to maximize capacity and lengthen life. NiMH and NiCd discharging from 0.1 to 1 amp. Individual lithium battery cell discharging for maximum safety.

Storage Mode
Choose this easy storage charge mode for confident long-term lithium battery storage.

Extra-Safe Charging
Safety limits include: voltage, current, capacity, time and input power. Delta-peak sensitivity prevents too much voltage going into the battery; automatic cutoff when the battery reaches maximum capacity; maximum charge time can be set; lower input voltage level.

Multiple Charging Profiles
Simplify charging by storing up to 5 battery pack profiles for charging different types of car/plane batteries, transmitter pack, receiver batteries and more.

Easy Cycling of Battery Packs
Revive battery packs for periodic maintenance or after a long storage. The charger safely charges the battery to full capacity, then slowly discharges it to a safe level up to 5 times. Ideal if you don’t use your batteries regularly.


  • Power Input: DC 11-18V or auto-switching AC 100-240V
  • Charge Current Range: 0.1-5.0 amp (50W max)
  • Discharge Current Range: 0.1-1.0 amp (5W max)
  • Current Drain for Balancing Point: 300 mA/cell
  • NiCd/NiMH battery cell count: 1-15 cells
  • Li-Ion/LiPo/LiFe cell count: 1S-6S
  • Pb battery voltage: 2V-20V
  • Weight: 578g
  • Length: 147mm
  • Width: 139mm
  • Height: 45mm
  • Part: 101974
  • Price: $120


 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2012-2018 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact