Facebook Twitter Gplus YouTube RSS Email Subscribe
magnify
magnify
Home RC Car Parts (Page 2)

RPM Team Associated B6/B6D Gull Wing Front A-Arms

RPM Team Associated B6/B6D GullWing Front A-Arms
To go along with their Flat Front A-Arms, RPM RC Products announces their new Gull Wing Front A-Arms for the Team Associated B6D and B6 buggies! The B6 and B6D are race-bred machines ready to tear up the track. In order to go fast, suspension settings need to stay locked in. With stock A-arms, the amount of slop at the hinge-pins can cause your suspension settings to wander (we found as much as 0.003” or .076mm of clearance in the hinge pin holes of a stock set of A-arms). Not with RPM A-arms! Our hinge-pin holes are held to extremely strict tolerances, with no more than 0.0005” to 0.001” (.013 to .025mm) of clearance, an improvement of nearly 300%! RPM customers have repeatedly reported that stock A-arms break quite easily. Whether on the track or off bashing at your favorite local hang-out, RPM A-arms are the toughest A-arms on the market so a rough landing or a hit from that hack that always seems to target you won’t take you out of the race! With unmatched performance, extremely lightweight materials and the ability to hold your suspension settings even after a wicked wreck, RPM A-arms will get you across the finish line every time! Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RC4WD Announces Two New Rotiform RC Truck Wheels

RC4WD Rotiform RC Truck Wheels
RC4WD is excited to announce their new partnership with Rotiform Wheels! The two wheels to first come out of this partnership are the RC4WD Rotiform Six-OR 2.2″ and the RC4WD Rotiform SNA 1.9″. Both wheels are machined from billet aluminum, feature a beadlock design, come finished in a gun metal anodizing,  and fit RC trucks with 12mm hex wheel mounts. See what they look like in the photos below. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

OS Speed 21RX-B V2 Nitro Buggy Engine

OS Speed 21RX-B V2 Nitro Buggy Engine
OS engines unveils the new Speed 21RX-B Version II nitro buggy engine! This version of the 21XR-B power plant has been totally re-designed. It’s even more reliable, and the new 21J3-I carb is easy to tune. The aluminum cooling head ensures steady power even under harsh conditions. And when you’re ready to move up to top competition, you can get up to speed with the 21XR-B Version II. This engine is upgradeable with high-performance OS Speed parts, letting you realize your full winning potential. Equip your ride with the 21XR-B V2, and start owning the podium. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Exotek TLR 22 Aluminum Front Camber Block With Roll Bar Mount

Exotek TLR 22 Aluminum Front Camber Block With Roll Bar Mount
For those looking to add a roll bar to the front end of their Team Losi Racing 22 buggy while also increasing its durability, Exotek Racing announces their new Aluminum Front Camber Mount with Roll Bar Mount! It is machined from 7075 aluminum alloy, weighs just 7 grams and is designed to fit the TLR 22 3.0 and 4.0 buggies and trucks. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Exotek TLR 22-4 2.0 Aluminum Front Suspension Mount

Exotek TLR 22-4 2.0 Aluminum Front Suspension Mount
New from Exotek Racing comes this Aluminum Front Suspension Mount for the TLR 22-4 2.0 4wd RC buggy! This must have upgrade helps avoid those costly and time consuming DNF’s from failures of the stock plastic part. It is machined for lightness and weighs just 17.6 grams. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RDRP Team Associated B64 Aluminum Diff Cases

RDRP Team Associated B64 Aluminum Diff Cases
Revolution Design Racing Products introduces their new Aluminum Front, Center and Rear Differential Cases for the Team Associated B64 buggy. They were developed to keep the drivetrain as consistent as possible over the whole run. The cases are machined from aircraft grade 7075 T6 aluminum and they sports a heatsink design to further help with heat dissipation. Using the cases not only improves the precision of the drivetrain, the greatly improved heat transfer also keeps the diff oil much cooler – compared to using the standard plastic case – which results in a much more consistent drivetrain behavior over the full run; even in high ambient temperatures. The diff cases come hard anodized for wear and looks and they includes a set of suitable inner cross pins for the internal gears. The part fits all B64 buggies equipped with the standard gear differentials and they are available separately for the front/rear as well as the center diffs. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RDRP Xray XB4 Aluminum Caster Block Set

RDRP Xray XB4 Aluminum Caster Block Set
Revolution Design Racing Products have introduced their new Caster Block Sets for the Xray XB4 series of 1/10th scale 4wd RC buggies. An improvement over the original construction, the new hubs allow you to easily adjust the camber link ball stud position and thus camber link length and roll center by simply adding or removing shims. The multi-piece design was used on rear uprights before and is now available for the front hubs. While offering the standard kit geometry the hubs also allow to run shorter links which can be beneficial in a range of track conditions. The lightweight design and aircraft-grade 7075-T6 aluminum adds only minimal unsprung weight while still being sturdy and durable. RDRP’s C-hubs are usable on all Team Xray XB4 series buggies and they are available in a 9 degree or 12 degree variant to adjust the corner characteristics of the buggy. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RC4WD Raceline Monster 1.0″ 1/18 Beadlock Wheels

RC4WD Gelande 1/18 Wheel Upgrade
The 1/18 RC4WD Gelande II and other 1/18th RC trucks get a new beadlock wheel option with the release of these new RC4WD Raceline Monster 1.0″ wheels! The feature a CNC machined billet aluminum build with a black anodized finish. They are designed to fit RC trucks with a 7mm hex wheel mount pattern. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RC4WD Losi Rock/Baja Rey Aluminum Rear Axle

RC4WD Losi Rock Rey Baja Rey Hardcore Aluminum Rear Axle
If you’ve been looking for upgrades for your Losi Rock Rey or Baja Rey then you might want to check out the new RC4WD Aluminum Rear Axle just released for these RC trucks. The axle features a CNC machined billet aluminum construction with a black anodized finish and printed RC4WD logo. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RC4WD SCX10 II AR44 Aluminum C-Hubs and Straight Axle Adapters

RC4WD SCX10 II AR44 Aluminum C-Hubs
New from RC4WD comes these Aluminum C-Hubs and Aluminum Straight Axle Adapters for the Axial SCX10 II with the AR44 axles. Both are CNC machined from billet aluminum with a black anodized finish and laser etched logos. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Copyright © 2012-2017 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact