Facebook Twitter Gplus YouTube RSS Email Subscribe
magnify
magnify
Home RC Onroad (Page 5)

Yokomo BD8 Touring Car

Yokomo BD8 RC Touring CarYokomo announces the new BD8 RC touring car! The 2016 IFMAR ISTC World Championships were held in Beijing China this August, with 150 drivers from 22 countries competing, this was always going to be the most difficult and competitive World Championships to date. Yokomo worked incredibly hard and the hard work paid off with the BD8 Securing a world title on its maiden outing. The Yokomo BD8 encompasses the same super low COG the BD7 did, which proved to be extremely competitive on high grip surfaces. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

CRC Xti WC Pan Car Aluminum Chassis

CRC Xti WC Pan Car Aluminum ChassisCRC recently unveiled their new Aluminum Chassis for the stock pan car world championship winning CRC Xti WC! While aluminum chassis on 1/12th cars go back 25 years, recently with changes to the carpet and new tires, aluminum is making a comeback for 1/12th scale. A properly made aluminum chassis is stiffer than standard carbon fiber which can lead to more consistent lap times on high bite tracks. This aircraft aluminum chassis from Team CRC is the result of development work with the race team headed by the World Champion podium finishing Team CRC Japan. It is stiffer than some of the other aluminum chassis on the market and built to original stock CRC Xti-WC geometry. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Protoform Chevy Corvette C7.R GT Class Body

Protoform Chevy Corvette C7.R GT Class BodyMeet the new Protoform Chevy Corvette C7.R 1/8 GT class RC car body! From the signature muscular Corvette stance and swept-back roofline, to the large front splitter and side vents, every detail of the full size race car is captured to add scale realism to the world of 1/8 GT. The extensive decal sheet lets you deck out your C7.R with Corvette branded windshield headers, Jake skull hood logo, number plates, and USA flags. Included with the body is an add-on rear wing, secured with three oversized nylon screws and featuring 2 trim-lines and spill-plate sizes including a lower line for sanctioned racing, and an upper line for low-grip club racing. The Protoform Chevy Corvette C7.R GT Class Body fits popular 1/8 GT cars with the shorter GT1 wheelbase of 325mm, such as the Mugen Seiki MGT7, Serpent Cobra GT and more. For GT2 racers, a longer wheelbase 360mm version of the C7.R is also available. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Serpent Project 4x Touring Car

Serpent Project 4x RC Touring CarSerpent Racing announces the new Project 4x RC touring car! The Serpent 4x features an innovative front and rear cantilevered single-damper suspension system that is designed to lower the car’s center of gravity. In the 4X car the heave and roll of the car operate and are set independently. The front and rear end of the car are almost identical in design and share many of the same parts front and rear, so you need less different spares. Other features include a 7075 T6 aluminum motor mount, an aluminum chassis brace, a rear gear differential and front spool, 2.0mm carbon fiber chassis, floating servo mount, inverse lever steering system and much more. Read more about the Serpent 4x’s unique suspension system after the break and let us know what you think in the comments below. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

HB Racing RGT8 1/8 GT Class Racer

HB Racing RGT8 1/8 GT Class RacerMeet the new HB Racing RGT8 1/8 GT class race car! The popular 1/8th scale Nitro GT Class continues to grow worldwide. The class features cars based on 1/8 buggy platforms, so they are simple & durable, and longer suspension travel allows them to be raced on temporary tracks in parking lots. Simple tuning and attractive prices adds to the equation and is a big part of the growth of the Nitro GT class around the world. The new HB Racing RGT8 features a chassis that is based on the World Champion D815 buggy. It’s highly adjustable for a variety of track conditions, with race-proven durability and performance. The race DNA from the D815 means the RGT8 is fully developed and super strong. Spare parts and upgrades are shared with the D815, so they’re readily available at hobby shops around the world. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Serpent Viper 977 EVO-2

Serpent Viper 977 EVO-2The Serpent Viper 1/8 RC race car gets updated with the release of the new Viper EVO-2! Key new features include a new rear end geometry with more overall grip and improved steering performance, as well as a new set of big bore shocks from the 411 4.0 and 748 WC which have machined pistons, a new seal package, machined spacers, coated aluminum parts, and hardened steel shafts. Other main specs include a 2 speed Xli gearbox, Centax race clutch, 7075 T6 aluminum chassis, 2.5mm carbon fiber radio plate, front CVDs and rear dogbone driveshafts, ball bearing supported sway bars and central rear axle break. Check out the pictures of the new Serpent Viper 977 EVO 2 below! Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Exotek RX2 LCG 190mm RC Touring Car Body

Exotek RX2 LCG 190mm RC Touring Car BodyExotek Racing is excited to bring you the new RX2 LCG 190mm RC touring car body! Designed for aggressive and precise handling, the body will up cornering speeds with its overall lower center of gravity. This was made possible by reducing the thickness of the roof section from 0.45mm down to 0.2mm. This makes the body lighter while keeping exceptional strength in the bumper and side skirts section. As compensation for the more forward body position the body features larger and lower wing mounts to allow for a taller wing to be used while still complying with rule books. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Exotek HPI Micro RS4 Aluminum Steering Hubs

Exotek HPI Micro RS4 Aluminum Steering HubsExotek Racing announces a new set of Aluminum Steering Hubs for the HPI Micro RS4 touring car! The new steering hubs feature a heavy duty 6061 aluminum alloy construction which makes them perfect for high speed applications where strength and durability are crucial. They are laser etched, polished and anodized orange for that factory race team look. Check out the pictures of the new Micro RS4 Aluminum Steering Hubs after the break. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Team Associated TC7.1 Factory Team RC Touring Car

Team Associated TC7.1 Factory TeamTeam Associated is proud to present the newest edition to their RC touring car lineup, the TC7.1 Factory Team! An evolution of its successful predecessor the TC7, the TC7.1 Factory Team kit comes packed full of the Factory Team options necessary to keep you racing at the highest level! The primary focus for the TC7.1 was to allow for a lower center of mass to take advantage of the higher grip levels. Starting with the ultra-smooth short FOX shocks with Genuine Kashima Coat mounted low on the chassis, and rounding out with DCV drive shafts for the front end, no corners were left untouched to make the smoothest power delivery and optimal load transfer. Other key features include a narrow chassis with optimized flex characteristics, one-piece motor mount, floating servo mount, and rear gear diff for maximum performance and minimal maintenance. The Team Associated TC7.1 is expected to hit hobby shop shelves later this month. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Trinity Equalizer 17.5t Brushless Motor

Trinity Equalizer 17.5t Brushless MotorTeam Trinity announces the new Equalizer series of RC brushless motors. The Equalizer is a low cost competition motor that features tamper proof stickers on the can that are designed to deter people from opening the motor for cheating purposes. Although the Trinity Equalizer is only available in 17.5t right now, Trinity is expecting to release the motor in 13.5t, 21.5t and 25.5t configurations in the future. Sorry, there is no pricing at this time, but this new motor is slated to go on sale in just two weeks time. Stay tuned! Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Copyright © 2012-2017 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact