Facebook Twitter Gplus YouTube RSS Email Subscribe
magnify
magnify
Home Offroad RC

Team Xray XB8 2018 Edition

Team Xray XB8 2018 Edition
Team Xray unveils the 2018 Edition of the XB8 1/8 nitro RC buggy! Features include an updated chassis, new rear shock tower, improved diff o-rings, new rear CVD driveshafts, a new lightweight wing mount, an updated body design, and much more! Check out the full list of updates and features below. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Exotek HB Racing D216 Aluminum Chassis

Exotek HB Racing D216 Aluminum Chassis
The HB Racing D216 RC buggy gets another upgrade option with the release of this new Aluminum Chassis from Exotek Racing! The chassis is machined from 7075 aluminum alloy and is designed to provide more consistent handling and lowered center of gravity for today’s highly groomed indoor tracks. It is machined with a chamfered edge on the bottom to improve ground clearance and the top is machined to a have 2.5mm thick main section to reduce weight and 4mm thick side rails area to maintain stiffness. Also machined pockets are added throughout to reduce weight. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Reedy Sonic 866/877 1/8 Brushless Motors

Reedy Sonic 877 1/8 Brushless Motors
Reedy’s all new Sonic 866 and 877 competition brushless motors for 1/8 RC buggies and truggies have finally arrived! Several months of development by our engineering staff and factory team drivers has resulted in motors that deliver performance that exceeds what is required at the highest level of competition. The Sonic 866, available in two kv versions, is designed for 1/8 buggy while its slightly longer brother, the Sonic 877, is intended for 1/8 truggy duty. However, motors are interchangeable between chassis types to create a wide range of performance options suitable for a wide variety of track conditions. All versions feature a precision machined case with an integrated heat sink to lower operating temperatures. This results in less fade over the course of a race, longer run times, and increased motor life. Sensored operation results in a smooth and controllable power band, while a powerful 4-pole rotor is supported by precision ball bearings for maximum power output and reliability. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Team Associated Announces Three New Engine Sound Systems

Team Associated Ess-One+ Engine Sound Systems
Team Associated announces three new Sense Innovations Engine Sound System products. These versions are smaller to make it easier to install and position. Along with all the features of the earlier model, the ESS-One+ is lighter and more compact in size, making it easier to install. Redesigned speakers have more power and longer life. The D-Class amplifier chip ensures efficient performance and high-quality sound output. The ESS-Dual+ has two opposing speakers for balanced sound and better diffusion. Four new mounting holders makes it easier to install on a variety of vehicles. Lightweight and compact in size, easy to install. Output is circuit, overload and thermally protected. And finally, the ESS-Air+ adds exciting sounds to your RC plane! Lightweight and more compact in size, making it easier to install. Output is circuit, overload and thermally protected. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Tekin Announces Their First Servo Lineup

Tekin T-440 Servo
While we don’t usually post about new servos, when a company like Team Tekin, who has such a long and rich history in the RC hobby announces their first servo lineup we take notice. Yesterday, Tekin unveiled eight new servos including two low profile servos, two standard sized servos, two 1/8 servos and two crawler servos. Each comes equipped with a digital magnetic position encoder in place of the standard potentiometer that most other servos utilize. This gives Tekin’s servos the best accuracy and linearity in the industry. Check out the rest of the details and specs on each of the new Tekin RC servos below. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Exotek Tekno EB410 Aluminum and Carbon Fiber Upgrades

Exotek Tekno EB410 Aluminum and Carbon Fiber Upgrades
The Tekno EB410 was only announced a few months ago but the guys over at Exotek Racing are already rolling out upgrades for the buggy. They include an Aluminum Center Bulkhead, Aluminum Rear Hubs, Aluminum Heavy Duty B Block, and a Carbon Fiber Battery Strap. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

RDRP Team Associated B64 Type B Carbon Fiber Shock Towers

RDRP Team Associated B64 Type B Carbon Fiber Shock Towers
Revolution Design Racing Products unveils their new Type B Carbon Fiber Shock Towers for the Team Associated B64 4WD buggies. First up is the front shock stay that utilizes an updated geometry with the upper link mounting positions sitting in an in-between position between the standard inner and outer rows. This lets the camber link ball stud sit in a row with the lower hinge pin for a greatly improved suspension geometry. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Team Associated RC28T Stadium Truck

Team Associated RC28T Stadium Truck
Less than a month since unveiling the SC28 Fox Edition and MT28, Team Associated announces the new RC28T! Just like the other variants of this 1/28 scale platform, the RC28T comes equipped with an integrated ESC/receiver unit, proportional steering servo, and a 2 channel 2.4GHz radio system with built in battery charger. The RC28T also features a unique set of stadium truck style dish wheels wrapped in a set of pin spike tires, as well as a stadium truck body that comes pre-painted to replicate the box art of the original RC10T! Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

First Look: JConcepts King Sling Body, Wheels and Tires

JConcepts Dennis Anderson King Sling Body, Wheels and Tires
In their latest YouTube video, JConcepts unveiled the new King Sling Body as well as the Mega Truck Wheels and Tires to go with it. From the mind of Dennis Anderson, the wild and wooly King Sling was born. The ultimate Mega Truck has a wild side, combining the brute power and durability of a monster truck with the madness of a mud racer. King Sling is a beast, and JConcepts has worked together with designers and builders to replicate this body shell to fit on a host of popular chassis including the Axial SMT10. It is expected to go on sale later this month. Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

JConcepts Rangers 2.2″ MT Tires and Midwest 2.2″ MT Wheels

JConcepts Rangers 2.2" MT Tires and Midwest 2.2" MT Wheels
Once upon a time, a tire helped start an entire industry. The 48” tire represented the largest tire added to a pick-up truck during the late 1970’s and spawned an entire monster truck craze. The “48’s” as a lot of enthusiasts called them, were special and featured a Zig / Zag tread pattern, deep cleats, and the large overall diameter. The size of the tire, made crushing cars possible and they even made their way into a Hollywood feature film. In the RC monster truck world, the “48’s” have never been available, until now. JConcepts announces the new Rangers 2.2″ MT Tires and Midwest 2.2″ MT Wheels! Read more…

 
 Share on Facebook Share on Twitter Share on Reddit
Add Comment  comments 

Copyright © 2012-2017 RCNewz.com
The Latest RC Car and Truck News, Pictures and Videos!
Privacy Policy - Contact