Once you saw the ready to run Axial RR10 Rock Racer, you had to know that the kit version wasn’t far behind. The Axial RR10 Bomber Kit is loaded with features allowing you to customize it and add your own electronics for the ultimate rock racer! Building on the current, successful RTR model, this kit version includes a wide variety of desirable option parts that deliver next level performance and durability including hard anodized aluminum suspension links, hard anodized aluminum steering links, long travel rear sway bar, hardened steel universal axles allowing up to 50 degrees of steering, aluminum lower link plates, and King adjustable machined aluminum shocks, front and rear heavy duty bevel gears, and a set of sticky BFGoodrich Baja T/A KR2 tires wrapped around 2.2 Walker Evans Racing beadlock wheels. Check out the full details and tons of pictures of the new Axial RR10 Bomber Kit below.
Tube Frame Chassis
The Axial RR10 Bomber Kit features the most realistic high strength composite tube frame chassis. Axial’s high strength composite plastic is impact resistant to help protect the RR10 from crash damage.
Aluminum Steering Links
Axial’s machined aluminum RR10 Bomber steering links give you more precise steering feel and response to help keep your rig pointed in the right direction. They’re hard anodized and use larger and stronger M4 hardware for durability.
Aluminum Suspension Links
The RR10 Bomber Kit’s upper and lower suspension links as well as the steering tie rod and drag link are machined from aluminum to reduce flex and provide precise control over the roughest terrain. The tubes are threaded at both ends for easy assembly and they use larger and stronger M4 hardware.
The Axial RR10 Bomber Kit includes a set of aluminum King Shocks featuring precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies, machined aluminum caps and aluminum preload spacers for precision shock adjustments. The rear shocks are mounted on the links rather than at the axle, allowing for more suspension travel which is better for high speed handling.
Aluminum Lower Link Plates
The Axial RR10 Bomber Kit includes hard anodized 2mm aluminum lower link plates for added durability and stiffness of the rear 4 link suspension.
The RR10 Bomber Kit includes a variety of shock mounting points for running dual shock setups and for additional suspension tuning options. On the skid plate you’ll find two front upper link mount positions and three rear upper link mount positions. All shock-mounting locations are dual shear with optional secondary shock mounts allowing for dual shock setups.
The pursuit of horsepower and the ability to put the power to the ground is one of the main aspects of offroad racing. This unique torsion bar design with long pivot arms used in conjunction with the long travel suspension is designed to help control the torque twist associated with massive power. This system also helps reduce body roll and adds stability at high speeds.
The RR10 universal joint axles increase steering angle to 50 degrees, that’s 60% over the stock dogbone/drive cup setup. Our universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; a design you’d see on 1/8 scale vehicles and it’s made of hardened steel so it’s capable of handling extreme power.
Featuring a new design specifically for the AR60 front axle, Axial updated the old knuckles by removing the steering arms and we’ve made them stronger by adding more material and gave them an updated, more refined look.
The WB8 HD driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
The RR10 Bomber’s AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
The Axial RR10 Bomber Kit comes equipped with a set of officially licensed Walker Evans Racing beadlock wheels dressed in an aggressive all black style and they work with most 2.2 tires. Our IFD (Interchangeable Face Design) wheel system makes it easy to dress it up with a new look. The wheel design allows you to vary the amount of air passing through the breather holes. You can select between having one, two or three open holes (two, four or six total) by rotating the inner beadlock ring. The position is locked with reassembly.
In the full-size world of off-road racing, BFGoodrich tires have proven to be the ‘go-to’ tire for numerous racing victories, including Randy Slawson piloting them to victory at the 2013 and 2015 King of the Hammers. Axial’s version of this tire captures the same aggressive look and provides remarkable performance on a wide variety of surfaces. This is the perfect tire for Axial RR10 Bomber Kit due to its high level of performance and diversity.
Remove two body clips to release the front hood for access to the adjustable battery compartment. The compartment features ample room for securing 2S/3S LiPo batteries.
With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
Heavy Duty Bevel Gears
The included heavy duty bevel gear sets offer you improved gear mesh reducing slop in the drive train. In addition, they help add weight down low which helps lower the center of gravity and on the rocks where you want it. Made from high grade steel and hardened for increased strength.
Spare Tire Mount
Bolted onto the back of the RR10 Bomber is an included BFGoodrich BAJA T/A KR2 and Walker Evans 2.2 wheel/tire combo with a quick release spinner for mounting.
Realistic scale details include molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels, two full color decal sheets with enough graphics for two completely unique looks, and a fully licensed scale tube chassis.
- Release Date: June 2016
- Part: AX90053
- Price: $360 Buy Now!