The fine folks over at Parma just announced a replacement body for the Traxxas Rally Racer announced late last year. Their aggressive new Rally Xtreme race body has airflow cutouts in the top of the front fenders and behind the rear wheel wells. It features a large rear wing that can also be cut out for even more airflow if desired. Not only is the Parma Rally Xtreme body a direct fit for the Traxxas Rally Racer but with a set of custom body posts it will also fit most 1/10 scale RC short course trucks! Read more…
Parma Rally Xtreme Body For Traxxas Rally
Losi 5IVE-T Roller 1/5 Short Course Truck
Team Losi just announced that their massive 1/5 scale short course truck, the 5IVE-T, is now available as a roller. You still get all the realism and performance of old but with the choice to option it out as little or as much as you’d like. The Losi 5IVE-T Roller includes all of the components that made the 5IVE-T iconic with the exception of the electronics and engine. Read more…
JConcepts B44.2 Aluminum Center Bulkhead Cap
JConcepts is excited to offer a replacement center bulkhead cap for the Team Associated B44.2 buggy kit. The machined aluminum component, anodized in blue, is a handy replacement for the stock plastic unit and is a drop-on to the center slipper assembly. With the motor mount and bulkhead as one assembly in the B44, temperatures peak out and transfer through the entire center assembly allowing the new cap to act with heat-sink capability. The stout design with external ribbing has increased strength over the plastic unit, is symmetrical in design and adds a higher level of detail and aesthetic appeal to an already championship vehicle. This part has been already used in competition by Ryan Maifield, winning events such as the Cactus Classic and JConcepts Indoor National Series events. Read more…
Preview: X Factory X-6 Cubed Off-Road Buggy
X Factory just released the first body off photos of their soon to be released X-6 Cubed conversion kit for the Team Associated B4 off-road buggy. According to X Factory, all of their team drivers have unanimously agreed that the X-6 Cubed is 2-3 tenths faster than their previous buggy, the X-6 Squared, while being even easier to drive. The X-6 Cubed features all new carbon fiber construction including a new slim design top chassis deck which allows chassis flex adjustments to suit track conditions and driving style. Read more…
AJS Axial Wrangler Front Bumper Mount
If you’re looking for a way to beef up the front bumper of your Axial Jeep Wrangler Rubicon then you might want to check out this new aluminum front bumper mount from AJS Machine. Built from T-6061 aluminum with a glossy black anodized finish, this SCX10 front bumper mount greatly increases the rigidity of your chassis and bumper, and is the perfect addition if you run a scale winch, plow or front end weights. It includes all mounting hardware and is now available for order. Read more…
Team Associated Apex Drift Wheels and Tires
For those of you who picked up one of the new Team Associated Apex touring cars released late last year, the folks over at AE just announced a set of drift tires designed for the car. The Apex Sprint Drift Tires are now available for sale by themselves or in a wheel/tire combo. Since they utilize 1/10 scale sizing standards, including 12mm hexes on the wheels, they should fit just about any touring car. Check out the pics and pricing after the jump! Read more…
Reedy 4600mAh 55C 4S Competition Lipo
Tested and developed by the championship-winning factory team drivers, Reedy’s innovative 4600mAh 55C 14.8V LiPo battery is a must-have for the hardcore 1/8 buggy racer who seeks maximum power output and run time in a compact package. The battery’s weight makes it easier to achieve perfect left/right weight distribution while 5mm power sockets offer the same convenience and low-resistance operation that 1/10 and 1/12 drivers have enjoyed for years. A durable hard case protects the battery from damage while three 2mm balance ports allow for balance charging using the included balance charge harness. Two 5mm sockets are also included. LiPo battery technology continues to progress and Reedy is proud to bring improved performance to the masses. Read more…
MIP Race Duty CVD Kit For Traxxas Vehicles
MIP just announced their latest line of high performance CVD drives dubbed the Race Duty series. The first kit to be offered in the Race Duty CVD series will be for the Traxxas Slash, Nitro Stampede and Nitro Rustler. The MIP Race Duty CVD’s distinguish themselves with their light weight design meant to improve acceleration while being extremely rugged thanks to their hard anodized 7075 T6 aluminum construction. They include everything needed for the install including steel hex adapters! Read more…
MIP X-Duty Twin Hammers CVD Driveshaft Kit
After some research and a unanimous vote from Twin Hammer owners, MIP has decided that the rear driveshaft was in the greatest need of improvement. Taking into consideration the grueling conditions that this shaft will be put through, MIP engineers have coupled their infamous MIP CVD design with the tank like characteristics of the MIP X-Duty splined axles to make the first MIP Rear Center Shaft that is worthy to take your Twin Hammers experience to the next level and keep you pulling trigger in the dirt and on the rocks longer! Read more…
First Look: JQ Products The eCar
Our friends over at RCCA just posted the first photos of the soon to be released JQ Products The eCar 1/8 scale electric buggy! Based on their popular 1/8 nitro buggy, The Yellow Edition, The eCar features a redesigned layout which equalizes the buggy’s new weight distribution thanks to the addition of a heavy 4S lipo battery pack. Although JQ has yet to announce a release date for the new car, they did reveal a few specs and pricing, check them and the pics out after the jump. Read more…
